課程概述 |
Lecture: 2 hours per week
Lab: 2 hours per week (Part programming and operation
of NC Machines)
一、課程簡介:
Introduction
Principle of Numerical Control
Manual Part Programming
Lab Orientation
Computer-Aided Part Programming (MASTERCAM or CATIA)
Computerized Numerical Control (CNC)
Direct Numerical Control (DNC)
Flexible Manufacturing Systems (FMS)
Material Handling Systems
Local Area Network; Integration Method
Computer-Integrated Manufacturing Systems
Group Technology
Process Engineering and Adaptive Control
CAD systems and examples
Geometrical modeling basics
Computer-Aided Process Planning
CAD/CAM Integration
二、參考書目:
Chang, T. C., R. A. Wysk and H. P. Wang, COMPRTER-AIDED MANUFACTURING, Prentice-Hall International, 1998
Chang, Chao-Hwa and Michel A. Melkanoff, NC Machine Programming and Software Design, Prentice-Hall International, Inc., 1989
Groover, M. P.k Automation Production System and Computer-Aided Manufacturing, Prentice-Hall, Inc., 1980
Koren, Y., Computer Control of Manufacturing Systems, McGraw-Hill Book Co., 1983
Luggen, W. W. Flexible Manufacturing Cell and Systems, Prentice-Hall, 1991
Talavage, J. and R. G. Hannam, Flexible Manufacturing System in Practice, Marcel Dekker, Inc., 1988
Pressman, R. S. and J. E. Williams, Numerical Control and Computer-Aided Manufacturing, 1977
Ranky, P. G., The Design and Operation of FMS, IFS, Ltd, 1983
Zeid, CAD/CAM, McGraw-Hill
Grading Systems: Lab 30%
Term project 30%
Final 40%
|